Overview

Previously published experimental aerodynamic efficiency results for a film cooled turbine stator blade are compared with analytical results computed from two published analytical methods. One method was used as published; the other was modified for certain cases of coolant discharge from the blade suction surface. For coolant ejection from blade surface regions where the surface static pressures are higher than the blade exit pressure, both methods predict the experimental results quite well. However, for ejection from regions with surface static pressures lower than the blade exit pressure, both methods predict too small a change in efficiency. The modified method gives the better prediction. Prust, H. W., Jr. Glenn Research Center NASA-TP-1151, E-9187 RTOP 505-04

Full Product Details

9781724754981

Table of Contents

Reviews

Author Information

Tab Content 6

Countries Available