Overview

The cylinder break just came back low, the inspector is scheduled for tomorrow morning, and every cubic yard of that pour is already in the deck. Knowing what the spec says is not the same as knowing what to do - and the gap between those two positions is where concrete projects fail, margins disappear, and careers stall. This book closes that gap by translating the governing standards for concrete construction - ACI 318-19, ACI 301-20, ACI 305R-16, ACI 306R-16, ASTM C-series test methods, OSHA 29 CFR 1926 Subpart Q, and IBC Chapter 17 - into field-ready judgment for every phase of the work. Inside, you will find: - Mix design submittals decoded - a step-by-step review checklist that catches w/cm violations, air content gaps, and slump discrepancies before the engineer sees the submittal - Concrete delivery decisions made defensible - ASTM C94 time limits, revolution counts, and water addition rules applied at the tailgate, not after the load is in the ground - Consolidation failures prevented at the source - ACI 309R-05 vibrator sizing, spacing patterns, and withdrawal timing that eliminate honeycombing before the forms come down - Hot-weather and cold-weather plans built before the pour - ACI 305R-16 evaporation rate calculations and ACI 306R-16 protection period requirements applied to real placement decisions - Low-strength results investigated correctly - the ASTM C42 core acceptance criteria and ACI 214R statistical framework that separate testing failures from concrete failures - IBC Chapter 17 special inspection obligations managed - notification procedures, hold points, and nonconforming work dispositions that protect the project record This book is written for concrete contractors, field superintendents, foremen, quality control technicians, and project managers who place structural concrete and own the results.

Full Product Details

9798197455512

Table of Contents

Reviews

Author Information

Tab Content 6

Countries Available