Overview

This book is all about finite wordlength errors in digital filters, con­ trollers and estimators, and how to minimize the deleterious effects of these errors on the performance of these devices. This does by no means imply that all about finite wordlength errors in filters, controllers and estimators is to be found in this book. We first ventured into the world of finite wordlength effects in 1987 when Gang Li began his PhD thesis in this area. Our more experienced readers might well say 'This shows', but we believe that the extent of our new contributions largely offsets our relative inexperience about the subject that might surface here and there in the book. Our naive view on the subject of finite wordlength errors in 1987 could probably be summarized as follows: • numerical errors due to finite wordlength encoding and roundoff are something that one has to live with, and there is probably not much that can be done about them except to increase the wordlength by improvements on the hardware; • these errors are as old as finite arithmetic and numerical analysis and they must therefore be well understood by now; • thus, if something can be done to minimize their effects, it must have been analysed and put into practice a long time ago. It is almost fair to say that we were wrong on all counts.

Full Product Details

Author:   Michel Gevers ,  Gang Li
Publisher:   Springer London Ltd
Imprint:   Springer London Ltd
Edition:   Softcover reprint of the original 1st ed. 1993
Dimensions:   Width: 15.50cm , Height: 2.00cm , Length: 23.50cm
Weight:   0.599kg
ISBN:  

9781447120414

ISBN 10:   1447120418
Pages:   373
Publication Date:   20 November 2011
Audience:   Professional and scholarly ,  Professional & Vocational
Format:   Paperback
Publisher's Status:   Active
Availability:   Manufactured on demand  
We will order this item for you from a manufactured on demand supplier.

Table of Contents

1 Introduction.- 1.1 Motivation and general statement of objectives.- 1.2 A historical view and some motivating examples.- 1.3 Outline of the book.- 2 Finite Word Length errors and computations.- 2.1 Introduction.- 2.2 Representations of binary numbers.- 2.3 Overflow and quantization errors.- 2.4 Arithmetic computations and roundoff errors.- 2.5 Dynamic range and scaling.- 2.6 Conclusions.- 3 Parametrizations in digital system design.- 3.1 Introduction.- 3.2 State space realization set.- 3.3 Sensitivity measure of a state space realization.- 3.4 Optimal realizations with respect to a sensitivity measure.- 3.5 Roundoff noise gain of state space realizations.- 3.6 Minimal roundoff noise gain realizations.- 3.7 Relationship between sensitivity measure and roundoff noise gain.- 3.8 Examples and simulations.- 3.9 Alternative approaches.- 3.10 Conclusions.- Appendix 3: Proof of Theorem 3.2.- 4 Frequency weighted optimal design.- 4.1 Introduction.- 4.2 Minimization of a frequency weighted sensitivity measure.- 4.3 Computation of the optimal realization set.- 4.4 Numerical example.- 4.5 Conclusions.- Appendix 4.A: Proof of existence of a minimum.- Appendix 4.B: Computation of weighted Gramians.- 5 A new transfer function sensitivity measure.- 5.1 Introduction.- 5.2 Minimization of an L2 sensitivity measure.- 5.3 Relationship between L1/L2 and L2 sensitivity measures.- 5.4 An example.- 5.5 Conclusions.- 6 Pole and zero sensitivity minimization.- 6.1 Introduction.- 6.2 A pole-zero sensitivity measure.- 6.3 The eigenvalue sensitivity problem.- 6.4 Pole sensitivity minimization and normal matrices.- 6.5 Zero sensitivity measure.- 6.6 Pole-zero sensitivity coordinate dependence.- 6.7 Optimal realizations for pole-zero sensitivity minimization.- 6.8 Numerical example.- 6.9 Conclusions.- 7 A synthetic sensitivity — roundoff design.- 7.1 Introduction.- 7.2 A synthetic FWL noise gain.- 7.3 Optimizing the Total Noise Gain.- 7.4 A numerical example.- 7.5 Conclusions.- Appendix 7: Existence of a constrained minimum.- 8 Sparse optimal and suboptimal realizations.- 8.1 Introduction.- 8.2 Sparse optimal realizations.- 8.2.3 Sparse block-balanced realizations.- 8.3 Theoretical versus actual sensitivity measure.- 8.4 Sparse quasi-optimal realizations.- 8.5 Sparse suboptimal realizations.- 8.6 Conclusion.- 9 Parametrizations in control problems.- 9.1 Introduction.- 9.2 Implementation of a pole placement controller.- 9.3 FWL LQG controller design.- 9.4 Conclusions.- Appendix 9: Sensitivity functions of closed loop system.- 10 Synthetic FWL compensator design.- 10.1 Introduction.- 10.2 State space description of a compensator.- 10.3 Analysis of FWL effects of a compensator.- 10.4 Optimal FWL compensator realizations.- 10.5 A design example.- 10.6 Conclusion.- 11 Parametrizations in the Delta operator.- 11.1 Introduction and motivation.- 11.2 Delta operator parametrizations.- 11.3 Sensitivity of delta parametrizations.- 11.4 Roundoff noise analysis.- 11.5 Conclusions.- Appendix 11: Proof of Theorem 11.5.- 12 Generalized transfer function parametrizations for adaptive estimation.- 12.1 Introduction.- 12.2 Parameter estimation and the information matrix.- 12.3 Connection between parametrization and data filtering.- 12.4 Optimal and suboptimal design choices.- 12.5 ?-operator parametrizations.- 12.6 Applications in estimation and adaptive filtering.- 12.7 Conclusions.- References.

Reviews

Author Information

Tab Content 6

Author Website:  

Customer Reviews

Recent Reviews

No review item found!

Add your own review!

Countries Available

All regions