Overview

An investigation conducted on the electrical interference induced by the operation of a hollow-cathode plasma contractor in a ground-based facility is described. The types of electrical interference, or noise, which are important to Space Station Freedom designers are classified as either conducted or radiated emissions. The procedures required to perform conducted and radiated emission measurements on a plasma contactor are examined. The experimental data obtained are typically examined in the frequency domain (i.e. amplitudes of the noise fluctuations versus frequency). Results presented indicate the conducted emissions, which are the current fluctuations from the contactor into the space station wiring, are affected by operating parameters such as expellant flow rate and discharge current. The radiated emissions, which are the electromagnetic waves induced and emitted by the contactor, appear to be influenced by the contactor emission current. Other experimental results suggest possible sources which are responsible for the observed noise. For example, the influence of the plasma environment downstream from the contactor on noise emission levels is described. In addition, a brief discussion is given on the correlation between conducted and radiated emissions and the mechanisms through which both are influenced by the plasma downstream of the contactor. Buchholtz, Brett W. and Wilbur, Paul J. Unspecified Center CONTACTORS; ELECTROMAGNETIC COMPATIBILITY; ELECTROMAGNETIC INTERFERENCE; GROUND TESTS; PLASMAS (PHYSICS); VACUUM TESTS; ELECTROMAGNETIC RADIATION; EMISSION; NOISE INTENSITY; SPACE STATION FREEDOM...

Full Product Details

9781722938819

Table of Contents

Reviews

Author Information

Tab Content 6

Countries Available