Overview

""Advanced Tribology"" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; tribology of coatings, surface and interface; biotribology; tribo-chemistry; industry tribology. The book reflects the recent progress in the fields such as lubrication, friction and wear, coatings, and precision manufacture etc. in the world. The book is intended for researchers, engineers and graduate students in the field of tribology, lubrication, mechanical production and industrial design. The editors Jianbin Luo, Yonggang Meng, Tianmin Shao and Qian Zhao are all the professors at the State Key Lab of Tribology, Tsinghua University, Beijing.

Full Product Details

Author:   Jianbin Luo ,  Yonggang Meng ,  Tianmin Shao ,  Qian Zhao
Publisher:   Springer-Verlag Berlin and Heidelberg GmbH & Co. KG
Imprint:   Springer-Verlag Berlin and Heidelberg GmbH & Co. K
Edition:   2010 ed.
Dimensions:   Width: 21.00cm , Height: 5.30cm , Length: 29.70cm
Weight:   2.608kg
ISBN:  

9783642036521

ISBN 10:   364203652
Pages:   1056
Publication Date:   11 November 2009
Audience:   College/higher education ,  Professional and scholarly ,  Postgraduate, Research & Scholarly ,  Professional & Vocational
Format:   Hardback
Publisher's Status:   Out of Print
Availability:   In Print  
Limited stock is available. It will be ordered for you and shipped pending supplier's limited stock.

Table of Contents

Plenary Lectures.- Current Industrial Activities of Tribology in China.- The Fullerene-Like Nanostructure Hydrogenated Carbon Films with Super-Low Friction.- Tribology in Nanomanufacturing-Interaction between Nanoparticles and a Solid Surface.- Tribology at Small Scales.- Frontiers of Research in Liquid Lubrication.- Keynote Talks.- EHL with Grease at Low Speeds.- The Nature of Adhesion and Friction.- Space Tribology of China.- Active Control of Sliding Friction.- Superhard and Low Friction Nanocomposite Coatings: Design, Synthesis, and Applications.- Tribology of Metal-on-Metal Bearings at High Inclination Angles.- Technical Sessions.- Key Factors to Induce Cavitation-Erosion.- Mechanical and Tribological Properties of TiC-Reinforced HSS-Based Composites with an Interpenetrating Network for High Temperature Self-Lubrication Applications.- Friction and Wear Characteristics of Advanced Space Lubricants.- Lubrication Analysis of Journal Bearing and Rotor System Using CFD and FSI Techniques.- Oil Film Behavior under Minute Vibrating Conditions in EHL Point Contacts.- Different Loading and Motion Applied on Hip Simulators Affects the Lubrication of Metal-on-Metal Hip Implants.- EHD Lubrication of Different Types of Gears.- The Role of Heat Partition in Elastohydrodynamic Lubrication.- Influence of Surface Roughness on Elastohydrodynamic Journal Bearings with Non-Newtonian Lubricants.- Theoretical Investigation of Journal Bearings with Non-Newtonian Fluids Included Thermal Effects.- Magnetic Fluid Based Squeeze Film Behavior between Transversely Rough Curved Plates.- Engine Lubrication System Analysis and Oil Pump Design Optimization.- Temperature-Dependent Rheology and Tribology of Lubrication Greases Investigated with New Flexible Platform for Tribological Measurements on A Rheometer.- Study on Characteristic Parameters of Wear Particle Boundary.- Viscosity Variation Model and Its Application in Micro/Nano-Scale Clearance.- Numerical Solving Method for the Structural Stiffness of Gas Foil Bearings.- Biotribological Properties of Natural Swine Joint Cartilage.- Effect of Surface Texturing on Lubrication Film Formation within Non-Conformal Contacts.- Experimental Investigation of Time-Dependent Oil Film Pressure in a Dynamically Loaded Journal Bearing.- Experimental Research and Numerical Simulation of LY12 and HPb62-2 Ring Compression.- Application of Metal Self-Repairing Additives on Cylinder-Piston Ring Rubbing Pairs.- Wettability Study of Multiply-Alkylated Cyclopentanes (MACs) on Silicon Substrates.- Numerical Analysis on Hydrodynamics of Circular Translational Polishing under Mixed Lubrication.- Micro-Tribological Analysis of POM-MoS2s-Compounds.- On Lubrication Characteristics of Dual Tori Double-Enveloping Toroidal Worm Drive.- Thermoelastohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft Deformation under Load.- Transient Behavior of Elasto-Metal-Plastic Journal Bearing during the Stage of Stop.- Analyses on the Splashing Parameters of High-Speed Oil Impacted a Wall in Jet Lubrications.- Interferometry Measurement of Spinning Effect on Sliding EHL.- Effect of Wide Dimples on Planar Contact Lubrication.- Friction Properties and Microstructure of Al-Cu-Fe Nano Films.- Tribological Properties of Ti6Al4V Alloy by FOTS Self-Assembled Monolayers Modification Treatment.- Influence of Spinning Effect on the Rolling EHL Films.- A Study on Lubrication Characteristics between Piston Ring and Cylinder Bore of Bent-Axis Type Piston Pump.- The Fabrication and Lubricant Performance of MoS2 Nanotubes Arrays.- The Research on the Lubricant Aging under Durability Test of the Porous Sliding Bearings.- Models for Predicting Friction Coefficient and Parameters with Influence in Elastohydrodynamic Lubrication.- Elastohydrodynamic Film Thickness in Elliptical Contacts with Rolling and Spinning.- Experimental Study on the Tribological Properties of Pure Powder Lubrication under Plane Contact.- Hydrodynamic Analysis and Experiment Verification of the High-Pressure Small-Flow Centrifugal Pump.- Effect of Liquid Surface Tension and Viscosity on Micro-Bubble Induced by External Electric Field.- Study of Water Lubrication in Sliding Point Contact Friction Pairs with Hydrophobic Surfaces.- A Simplified Numerical Elastic-Plastic Contact Model for Rough Surfaces.- Film Characteristics of Grease in Point Contact under Micro-Swaying Motion.- Effects of Solid Body Temperature on the Non-Newtonian Thermal EHL Behavior in Point Contacts.- Numerical Analysis on Dynamic Characteristics of Flying Magnetic Head with Ultra Thin Spacing.- The Analysis of Higher Guide Bearing Pad Temperature and Its Fault Diagnosis.- Pitting Life Prediction Based on a 3-D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation.- Numerical Lubrication Simulation of Metal-on-Metal Hip Joints: Ball-in-Socket Model and Ball-on-Plane Model.- Deterministic Simulation of Surfaces in Conformal-Contact Lubrication.- Simulation and Experimental Validation of the Effect of Surface Texture on Fluid Film Formation.- Marangoni Stress and Its Effects on the Flow in an Evaporating Sessile Droplet.- Film Forming Characteristics of Oil-in-Water Emulsion with Super-Low Oil Concentration.- A Piston Lubrication Model Considering the Coupling between the Piston Secondary Motion and the System Inertia Variation in an IC Engine.- Analysis of the Combined Effect of the Surface Roughness and Inertia on the Performance of High-Speed Hydrostatic Thrust Bearing.- Study on the Efficiency of the New-Style Reducer with the Green Lubricant.- Pressure Dependence of the Limiting Shear Stress Coefficient of Liquid Lubricants.- A Method of Dual Number for the Aerodynamic Property Analysis of Gas-Lubricated Mechanism: Self-Pressurizing Thrust Bearings and Non-Contacting Face Seals (Part I: Analytical Methods).- A Model for the Calculation of the Micro-Pores Number of Compressively Molded Polyimide Porous Materials.- Frictional Dynamics in a Two Dimensional Frenkel-Kontorova Model with Square Lattice Symmetry.- Advances in Investigation of Elasto-Aerodynamic Lubrication in Compliant Foil Bearings.- Normal Stress Effects in Journal Bearing Lubrication with Maxwell Fluid.- Analysis of Bearing Outer Ring Creep with FEM.- Effects of Content of MoS2 on Sliding Tribological Behavior of Copper-Based Powder Metallurgy Materials under Electrical Current.- Research on Frictional Wear Properties of C/C Composite with Electric Current.- Friction Behavior of C/C-SiC Braking Composites Fabricated by Warm Compacted-in situ Reaction.- Tribological Properties of Hybrid Ag4SiW12O40 Nanoparticles Multilayer Films.- Study on Fatigue Crack Behavior of Rail in Different Curve Radius.- Improvement in Wear Resistance of TiNi Alloy Processed by Equal Channel Angular Extrusion and Annealing Treatment.- Self-Healing of a Soft Primer Coating Caused by Plasticization during Sliding against UHMWPE.- Performance of an Infinitely Long Transversely Rough Hydrodynamic Slider Bearing.- Investigation of Fretting Fatigue Behavior of Ti811 Alloy at Elevated Temperature.- Dry Sliding Wear Behavior of a Tribological Couple: Spray-Deposited Al-Si/SiCp Composites/Brake Pads.- Wear Behaviors of a Cu-Based Bulk Metallic Glass under Various Gas Atmosphere.- A Study of the Correlation between Gear Wear and Vibration.- Study on the Relationship between Microstructural Change in Friction-Induced Deformation Layer and Friction Behavior of Austenitic Stainless Steel.- Abrasive Wear Behavior of Several Metallic Materials under Simulated Sand-Dust Environment.- Wear Behavior of Plasma-Nitrided 2Cr13 Martensitic Stainless Steel under Air and Vacuum.- Sealing Performance and Wear Mechanism of PTFE Oil Seal.- Fretting Corrosion Wear of Synergy between Mechanical and Electrochemical for Biomaterials in Hanks Balanced Salt Solution.- Torsional Fretting Behaviors of UHMWPE against Different Counter-Bodies.- An Experimental Study on the Rotational Fretting Wear Behavior of LZ50 Steel.- Comparative Study of Tribological Properties with Different Fibers Reinforced PTFE/PEEK Composites at Elevated Temperatures.- Research on Friction Characteristic of End Faces of Mechanical Seals.- Failure Mechanism of Hadfield Steel Crossing.- Synthesis and Tribological Behavior of Surface Coated Cu Nanoparticles in Liquid Paraffin.- Tribological Behaviors at High Load of MoS2 Films in Vacuum.- Experimental Study on Running-in of Steel Fiction Pair of Block on Disk in Oil with Micro-and-Nano Diamond Powder.- Thermomechanical Properties and Tribological Behavior of CaCO3 Whisker Reinforced Polyetheretherketone Composites.- Corrosive Fretting Wear Behavior of a Titanium Alloy TC11 in Artificial Seawater.- Investigation on Rolling Contact Fatigue and Wear Properties of Railway Rail.- Superlubricity Characteristics Using Ceramic Composite Mineral Powder as Lubricating Oil Additive.- On the Wear-Resistance of Zinc-Based Composites Reinforced by Modified Silicon Phase.- On the Wear-Resistance of Low-Alloyed Steel Modified by Inoculants.- Research on Worn Mechanism of Disc-Brake Pair Materials for Drilling Rig.- Modelling of Self-Lubrication in Frictional Interaction.- An Asperity-Contact Based Oxidation Model for Fretting Wear with the Presence of Debris.- Rolling Contact Fatigue of Silicon Nitride Balls under Pure Rolling Condition.- Influence of Different External Pressure on the Thermo-Mechanical Coupling of the Rough Surface during Sliding Contact.- Effect of Transverse Surface Topography on Cavitation Erosion.- The Theory of Debris Group in Ferrographic Analysis.- A Method to Monitor Nonferrous Debris in Ferrographic Analysis.- Interaction between Micro-Particales and Bubbles in Cavitation-Erosion of Hydro-Machinery.- Magnetization of Friction Surfaces and Wear Particles under Tribological Processes.- Wear Progress Prediction of Carbide Tool in Turning of AISI1045 by Using FEM.- Friction and Wear Properties of Fe7Mo6-Based Alloy under the Lubrication of Ethyl-Alcohol.- Seizure of PEEK and Its Composite at High Sliding Velocity in Oil Lubrication.- Tribological Behavior of Chromium Alloyed Layer Prepared on Surface of TiAl.- Wear Characteristics under Boundary Lubrication Contacts in Phosphorated Starch Based Electrorheological Fluids.- Abrasive Wear Mechanisms of Multi Component Ferrous Alloys Abraded by Soft, Fine Abrasive Particles.- The Analyzes of Mutual Influence of Contact Spots in Sliding Contact of a Periodic Surface and a Viscoelastic Foundation.- Different Nano-Fillers on the Tribological Properties of PTFE Nanocomposites.- Study on Surface Passivation Treatment and Tribological Properties of 1Cr18Ni9Ti Stainless Steel in Hydrogen Peroxide.- High Speed Tribology: Some Developments on Thermal Behaviors.- Dry Sliding Wear Behavior of Cu-Graphite Composite within a Wide Range of Sliding Velocity.- Tribological Aspects of Control over Frictional Interaction between Solids in the Presence of Liquid Crystals.- Effects of the Concentration of Sodium Lauryl Sulfate Solution and NaCl Additive on the Potential-Controlled Friction.- Study of Wear and Corrosion Properties of Coated Ionic Liquid.- Deformation Behavior of Al-4Cu-2Mg Alloy during Cold Upset Forging.- Dry Sliding Wear Behavior of Pure Aluminium and Al-Cu Alloys.- Tribological Properties of Spark-Plasma-Sintered Al2O3-SrSO4 Self-Lubricating Nanocomposites at Elevated Temperatures.- Tribological Behaviors of Some Materials in Sea Water.- Nanofretting Wear of Monocrystalline Silicon (100) against Spherical SiO2 Tip in Vacuum.- Influence of Surface Finishing Operations on the Reciprocating Sliding Friction and Wear Response of WC Based Cemented Carbides.- Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole Composites.- Friction and Wear Behavior of Laser Cladding NiAl/hBN Self-Lubricating Composite Coating.- Research on the Wear-Resisting Material Produced by Vacuum Evaporation Pattern Casting.- Effect of Surface Topography on Friction and Wear of Cast Iron for Cylinder Liners.- Wear Resistance Analysis of Hardening Materials for Engine Cylinder.- Effects of Speed Sequence on Friction Properties of Sintered Cu-SiO2.- The Fluid Dynamic Lubrication between Tooth Surfaces of High Order Contact.- Study on Friction and Wear Behavior of Glass Fiber and Fly Ash Reinforced MC Nylon Composites.- Experimental Study of Ultrasonic Vibration Assisted Chemical Mechanical Polishing for Sapphire Substrate.- Friction and Wear of the Ceramic Coating Formed on Magnesium Alloy.- Thermal-Mechanical Couple Simulation of Solid Brake Disc in Repeated Braking Cycles.- Preliminary Applications of King's ART Technology in Industry.- Wear Properties of Potassium Titanate Whiskers Reinforced ZL109 Alloy Composites.- Mineralogical Mechanochemical Agent Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces.- Experiment Research on the Friction Performance of O-Ring with Different Oil Swelling Ratios.- Friction Behaviors of Bushing in Rolling Contact with Shaft and Electroless Ni-PTFE-P or Ni-Al2O3-P Coating.- Nano and Micro Indentation and Scratch Tests of Mechanical Properties of Thin Films.- Synthesis of Nano-MoS2 Particles and Its Role in the Self-Lubrication of Polyacetal-Based Composite.- Analysis of a Three-Body Contacting model with the Adhesive effect.- Analysis of Three-Body Contacting Model with Scale Effect.- Adhesion, Friction and Wear Measurements at Microscale.- Fabrication and Nano-Tribological Behaviors of PDDA/Ag NPs Composite Molecular Deposition Films.- Frequency Shift of Single Walled Carbon Nanotube under Axial Load.- Effect of Heat Treatment on the Nano-Tribological Properties of Ionic Liquid Films.- Analysis on Wafer Tilt Effects in CMP Process.- Size Effects on Friction of C3602 in Cylinder Compression.- Investigation on the Tribological Characteristics of Nano/Micro Solid Anti-Wear Additives in Engine Lubricants.- The Influence of Carbon Nanotubes on the Tribological Behavior and Wear Resistance of a Polyamide Nanocomposite.- Experimental Investigation of the Frictional Behaviors at Particle-Surface Interfaces in CMP Application Using an Atomic Force Microscope.- Finite Element Simulation and Analysis of Nano-Scale Adhesive Contacts.- Nano/Micro-Tribological Properties of Ultrathin Functionalized Imidazolium Ionic Liquid Films on Silicon Wafer.- Micro Asperity Type Induced in Electrostatic Resistance of MEMS.- Experimental Analysis and Numerical Simulation of the Recess Slider in Magnetic Recording System with Ultra-Thin Spacing.- Effect of Solvents on Frictional Properties of Monolayer Lubricant Films Coated on Magnetic Disk Surfaces.- Fly-Ability and Durability Test of Dynamic Fly Height Heads at 1 nm Clearance.- Cavitation Erosion Characteristics of Titanium Alloy Thin Film Prepared by Ion Beam Enhanced Deposition.- Measurements of Vertical Elongation and Adhesive Force of Nanometers-Thick Lubricant Films on Magnetic Disks Using Micro Probe for SPM.- Experimental Research on Boundary Slip of Confined Liquids at Micro/Nano Scale and Effect of Shear Rate and Viscosity.- Study on Micro-Scale Gas Slider Bearing w ith Direct Simulation Monte Carlo Method.- Tribological Behaviors of Self-Assembled Dual-Layer Films in Atmosphere and in Vacuum.- Research on Fractal Contact Model of Cylinders' Surface.- Friction between Diamond-Like Carbon (DLC) Films-a Molecular Dynamics Study.- Molecular Dynamics Simulations of Atomic-Scale Friction in Diamond-Silver Sliding System.- Molecular Dynamics Study on Carbon Nanotubes Sandwiched between Si Surface.- Tribological Aspects of Nanoimprint Process.- Molecular Dynamic Simulation of Effect of Crystallographic Orientation on Nano-Indentation/Scratching Behaviors of BCC Iron.- 3D Misorientation of Cantilevers and Its Impact in Friction Force Microscopy.- Coupled Simulative Analysis for Drive Characteristic of Micro-Comb Structure.- Relating Friction and Processes Development during Chemical - Mechanical Polishing (CMP).- An Irreversible Thermodynamics Theory for Friction and Wear.- Fabrication and Flying Test of Silicon Sliders.- Surface Damages on Silicon Surfaces Created by Large Silica Cluster Impacts: Molecular Dynamics Simulation.- Silicon Oxide Surface Chemistry and Nano-Tribology.- Dynamic Testing for Evaluation of HDI Robustness.- Effect of Wall Roughness on Electroosmotic Flow in Microchannels.- Nanopositioning and Nanomeasuring System: Friction and Its Control.- Fundamentals of Friction and Energy Dissipation.- The Future of Boundary Lubrication by Carbon Coatings and Environmentally Friendly Additives.- Tribological Behavior of Sputtered Boron Carbon Nitride Coatings and the Influence of Processing Gas.- Effect of the Prepared Process on Tribological Properties of Multi-Layer Elastomeric DLC Monolayer.- Tribology Behaviors of in situ Nanoparticles Doped Molecular Deposition Films.- The Friction Property of Hydrogenated Carbon with Fullerene Microstructure after Annealing.- Study of Worn Surface Characterization Based on Singular Entropy.- An Adaptive Meshless Model for Asperity Thermal Elasto-Plastic Contacts Considering Temperature-Dependent Material Properties.- Thermal Oxidized Coating on Surface of Titanium Alloy for Improvement of Tribological Properties in Vacuum.- Study on Friction and Wear Properties in Vacuum for ?-Ray Irradiated PTFE Coatings.- Friction and Wear Behaviors of Plasma Sprayed Conventional and Nanostructured WC-12Co Coatings at Elevated Temperature.- Wear Behavior of Chromizing-Titanizing Coating.- Preparation and Polishing Performances of ?-Al2O3/Fe2O3 Composite Particles.- Effect of Gamma Irradiation on Friction and Wear Behavior of MoS2/Graphite Coatings in Vacuum.- Preparation of Silica / Alumina Composite Abrasives and Their CMP Behavior on Hard Disk Substrate.- Friction Properties of Laser Surface Texturing and Molybdenum Alloying Duplex-Treated Ni-Based Alloy.- Erosion Characteristic in Ultrasonic Cavitation Experiment.- Modification Effects of Potassium Titanate Whisker on the Water Absorption and Tribological Properties of PTFE Composites.- Influence of the C+-Implantation Dose on the Wetting and Adhesion Properties of Silicon Surfaces.- The Effect of Laser Induced Oxygen-Diffusion Hardening on the Surface Structure and Scratch Resistance of Commercially Pure Ti.- Structure and Tribological Characterization of TiB2/TiBN Multilayer Coatings Deposited by Magnetron Sputtering.- First Principles Investigation of Water Adsorption on Fe (110) Crystal Surface Containing N.- Research on Fabrication and Tribological Properties of Ti-Al Intermetallic Compound Lubricate Film.- XPS and SEM Analyses of Self-Repairing Film Formed by Mineral Particles as Lubricant Additives on the Metal Friction Pairs.- Study on the Characteristics of Transferred Lubricating Thin Films on Ceramic Surfaces Generated in Liquid Nitrogen.- Cr17Ni14Mo3 Powder Laser Cladding on 45Steel Substrate.- Microstructure and Tribological Properties of Plasma Sprayed NiCr/Cr3C2 and NiCr/Cr3C2-BaF2-CaF2 Composite Coatings.- Friction and Wear Property of Amorphous Carbon Films Prepared by Ion Beam Assisted Deposition.- Research on Silicon Content and Structure Relationship of Amorphous Si-DLC Films by Molecular Dynamics Simulations.- Effect of Deposition Parameters on Nano-Mechanical Properties of DLC Films by PECVD.- The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves.- Formation and Crystallization Kinetics of Amorphous Alloys.- Fabrication and Wear Resistance of Ni-CeO2 Nanocomposite Coatings by Electrodeposition under Ultrasound Condition.- On the Measurement of Slip Length for Liquid on Super-Hydrophobic Surface.- Effect of Plasma Surface Niobizing of ?-TiAl Alloy on Wear Resistance.- Tribological Properties and High-Speed Drilling Performance of Zr-C?H?Nx% Coatings with Different Contents of Nitrogen.- Tribological Behavior of Sputtered CrAINbN Hard Coatings at Elevated Temperatures.- The Method of Elastic Coatings Diagnostics from Indentation Data.- The Effect of Electric Field on Adhesion Force with Liquid in MIM Structures.- Simulation of Friction Composite Behavior Using Heat Treatment.- In-situ Microtribology with High Local Resolution.- Optimization of Energy Efficiency of Transparent Conducting Oxide Thin Films in the Field of Solar Cells by Microtribological Rating.- Contact Analysis of a Spherical Wear Particle between Elastomeric Seal and Coated Steel Surface.- Effect of Particles Size and Morphology of Selected Compounds of Friction Composite on Friction Performance.- New Technique of DLC Coating Obtaining for Tribology Applications.- Effect of Spraying Parameters on Microstructure and Thermal Stability of Fe-Based Metallic Glass Coatings.- Factors Influencing the Fluid-Assisted Surface Cracking under Rolling-Sliding Contact Loading.- Microstructure, Phase and Microhardness Distribution of Laser Deposited Ni-Based Amorphous Coating.- Friction Modifiers Optimization of the Ceramic Composites for Automotive Applications.- Friction and Wear Behaviors and Rolling Contact Fatigue Life of TiN Film on Bearing Steel by Plasma Immersion Ion Implantation and Deposition Technique.- Connectivity Characterization of 3D Surface Topography Based on Mathematical Morphology.- Effect of Microstructure on the Friction Properties of the Electroless Ni-P Deposit.- Erosion Behaviors of Elastic Polymer Coatings.- Mechanical Properties of the TiAlSiN Coatings by Post Heat Treatments.- In-situ Measurements of Surface Temperature Fields on Ring-Block Contact Surface under Friction Using an Infrared Thermography.- Research on the Preparation, Characterization and Tribological Properties of Ultra-Thin Self-Assembled Monolayers on the Magnetic Head Surface.- Super-Hydrophobic and Self-Lubricating Carbon Coating on Ti3SiC2.- Corrosion Protection of Ultra-Thin Diamond-Like Carbon Films on Cuprum.- SEM and AFM Study on Nanoparticles Used as Lubricating Oils Additives.- Study on Wear Model for Piston Ring and Strengthened Cylinder Wall of Engine.- State of the Art in Laser Surface Texturing.- La2O3 Effect on Microstructure, Mechanical and Tribological Properties of Ni-W Coatings.- A Comparative Study of Growth Process and Tribological Behavior between Single Component and Mixed Alkylsilane Self-Assembled Molecular Films.- The Effect of Surface Morphology on the Friction Behavior of HF-CVD Diamond Films.- Particles Detection and Analysis of Hard Disk Substrate after Post-CMP Cleaning.- Hard Wear-Resistant Coatings: A Review.- The Cavitation Erosion of the Mild Carbon Steels Implanted with Titanium and Nitrogen.- Research of the Pits Induced by MnS Inclusions at the Incipient Stage of Cavitation Erosion.- The Water Wettability of the Hydrogenated and Oxygenated Diamond Films.- Investigation on the Effect of Transverse Grooves on Friction Force.- Research for Forming Mechanism of Benard Coating Shaped Bi-Unit Composite Structure.- Microstructure and Mechanical Properties of TiCN Coatings Prepared by MTCVD.- Erosion-Wear Behavior and Mechanism of HVAS Coatings.- Tribological Properties of Textured Ti Coating Prepared by Masked Deposition.- A Method of Micro Laser Surface Texturing Based on Optical Fiber Focusing.- Application of Laser in Surface Technology -An Overview of the Research Work Performed in SKLT.- Influence of Heat Treatment on Hardness, Elastic Modulus and Bonding Strength of Ti/Ta/TiN/TaN Nanomultilayer Coatings.- Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole.- Diamond-Like Carbon Thin Films Deposition on Glass Using an Electron Cyclotron Resonance (ECR) Microwave Chemical Vapor Deposition (CVD) System.- The Biotribological Behavior Researches on the ?-Tocopherol Doped and Gamma-Irradiated UHMWPE.- The Effects of Protein and pH on the Tribo-Corrosion Performance of Cast CoCrMo - A Combined Electrochemical and Tribological Study.- Biotribological Properties of Carburized Titanium Alloys.- Effect of Corrosion and Biofilm on Friction Behavior in Biotribocorrosion System for Metal-on-Metal Hip Prosthesis.- A Microscopic Model for Pedestrian Sl ips Caused by Particle Contamination.- Elastohydrodynamic Lubrication of Aspherical Metal-on-Metal Artificial Hip Joints.- Long-Term Contact-Coupled Wear Prediction for Total Metal-on-Metal Hip Joint Replacement.- The Molecular Orientation Induced by Multi-Directional Sliding in the UHMWPE Used for the Artificial Joint Replacements.- Radial Displacements in a Thin Semi-Spherical Layer of Biphasic Articular Cartilage for Use in EHL Models of Natural Hip Joints.- Investigations of the Sliding Friction Behaviors of Locusts on Slippery Trapping Plate.- Tribology of Sequentially Irradiated and Annealed UHMWPE with and without Impingement.- Study on UHMWPE Carrying Estradiol to Treat the Particle-Induced Osteolysis.- Friction and Wear Characteristics of UHMWPE Studied by Orthogonal Method.- Wear Mechanism of Sliding Tracks between Femoral Head and Acetabular Cup of Artificial Joint.- Dynamic Contacting Characteristic of Natural Articular Cartilage under Reciprocating Sliding.- Application of Principal Component Analysis and Fuzzy C-Means Clustering Algorithm to the Classification of UHMWPE Wear Debris from Artificial Joints.- Numerical Surface Characterization of Wear Debris from Artificial Joints Using Atomic Force Microscopy.- A Novel Propelling Mechanism Based on Frictional Interaction for Endoscope Robot.- Study on the Release of Estradiol from UHMWPE Loading Estradiol Wear Debris in vitro.- A New Method To Simulate Wear within the Patellofemoral Joint of TKR.- Modification and Tribological Study on Implant Polymers of Hip Prosthesis.- Dynamic Contact Model of Bio-Adhesive Pads of Animals: Simulation Experiments.- Examination of Biolox (R) delta from Serum Lubricated Reciprocating Sliding Wear.- Lubrication of Synovial Joints.- Mechanism and Applications of Chemical and Mechanical Polishing.- Tribological Performance of Biomass-Oil from Straw Product.- Extreme Pressure Properties and Mechnism of Bismuth Naphthenate with Sulfur Containing Additives.- Synthesis and Tribology Properties of Stearate Coated Ag Nanoparticles.- Filtrate Reducer Activity and Antiwear Behavior of Drilling Fluid Doped with an Non-Conventional Additive.- Utilization of Industrial and Agricultural Wastes as a Source of Lubricants, Additives and Fuels.- Effect of Tribochemical Reaction on Friction and Wear of DLC under Lubrication with Ionic Liquids at High-Vacuum Condition.- Tribochemical Reaction of Ionic Liquids on Sliding Metal Surfaces.- The Tribological Properties of Oil-Soluble Nano-Copper and Nano-Silica Particles as Additives of Lubricating Oils.- Preparation and Tribological Properties of Monodispersed Metallic Cu-Sn Alloy Nanoclusters with Modified Surface.- Tribological Studies on a Novel Borate Ester Containing Benzothiazol-2-yl and Disulfide Groups as EP and Multifunctional Additive.- Tribological Behavior of AZ91D Magnesium Alloy against SAE52100 Steel under Ionic Liquid Lubricated Conditions.- Tribological Characteristics of Magnesium Alloy Using BN-Containing Additives under Boundary Lubricating Condition.- Synthesis of YPO4 Nanoparticals vis Microemulsion Method and Its Friction Properties of Lubricating Oils.- A Protective Coating Formed in-situ on the Cylinder Bore in Presence of Mg6Si4O10(OH)8.- Chemical Mechanical Polishing of Copper in Organic Phosphonic Acid System Slurry.- Chemical Mechanical Planarization of Copper Using Ethylenediamine and Hydrogen Peroxide Based Slurry.- Rheological and Tribological Characteristics of Chemically Modified Rapeseed Oil.- Research on Friction-Coatings with Activated Ultra-Thick Tin-Base.- Surfactants Lubricating Oil Additives.- Efficient Tribology Testing of Lubricating Oils with Nano-Additives.- Manufacture and Characterization of C/C-SiC Fabricated by Warm Compacted-in situ Reacted Process.- Experimental Investigations on Relationship between Sorptive Properties, Surface Tension, Contact Angle and Lubricity of Engine and Gear Oils.- The Latest Technology of Traction Drive Half-Toroidal CVT.- Long Life Bearing Technologies on Material Aspect.- Fault Diagnosis of Gear Using Oil Monitoring Samples and Vibration Data.- Prediction of Static Performance of Bump-Type Foil Bearings and Validation.- Study on Condition Monitoring in Petrochemical Equipment Using Oil Analysis Technology.- Dynamic Mechanical Properties of Polymer-Lining and Their Effect on Coefficient of Friction.- Machine Condition Monitoring and Remaining Life Prediction Using Integrated Approach.- Study on Condition Characteristics of Tribo-System and Its Description Method.- Study of Tribological Faults and Their Prevention Approaches in Dredger.- Elastohydrodynamic Lubrication and Asperity Contact Simulation of Engine Main Bearing with Flexible Rotating Crankshaft and Flexible Engine Block.- Tribology Extenics Condition Evaluation Based on Case Reasoning.- Effect of Surface Material on the Cavitation Erosion Noise: Experimental Investigation.- Research on Mechanism of Casing Wear in Sliding-Impact Wear Condition.- Durability of Phosphorated Starch Based ER Fluid under Damper.- Effect of Different Atmosphere on Dry Friction Behavior of Steel Sliding against Brass at High Speed.- A Study on the Application of a Mineral Additive in Lubricating Oil for Cylinder Liner.- Effect of Ingredients in Slurry Containing Alumina on Polishing of Hard Disk Substrate.- Study on Dispersion Stability and Self-Repair Principle of Ultrafine-Tungsten Disulfide Particulates.- Research on Micro-Abrasion Performances of TiN Coating in Simulated Body Fluid.- Micro-Abrasion-Corrosion of Ti6Al4V Alloy in Simulated Artificial Hip Joint Environments.- Chemical-Mechanical Polishing of NiP Alloy for Hard Disk Drive Substrates.- The Material Removal Rate of Metal Polishing Process.- Tool Life Modelling for High-Speed Milling.- Nano-Scratching-Induced Damages and Their Effect on Fracture Properties of a Single Crystal Sapphire.- Interfacial Forces in Chemical-Mechanical Polishing.- Influence of Water on the Tribological Behavior of Collector Materials against Railway Contact Wires at High Sliding Speeds.

Reviews

Author Information

Tab Content 6

Author Website:  

Customer Reviews

Recent Reviews

No review item found!

Add your own review!

Countries Available

All regions